Extended Information:
Fine Texture is designed for use on interior or exterior surfaces providing a “one-step” texture for any new construction surface. This easy-to-apply texture covers hairline cracks on repaired surfaces.
Medium Texture is designed for interior or exterior
surfaces providing excellent repair qualities to fill and cover moderately flawed and cracked surfaces. It may be used on smooth surfaces where a pronounced textured look is desired or with extensively cracked walls that require extra cover-up.
Coarse Texture is excellent for interior or exterior surfaces
where a higher degree of “fill-in” and covering qualities are required. It is suitable for use on large cracks and extensively repaired surfaces or wherever a more defined texture is desired. It provides excellent texturing to cinder blocks and brick in only one coat. COVERAGE Coarse–80 to120 square feet–depending on product application Medium–100to120 square feet–depending on product application Fine–150 to200 square feet–depending on product application INSTRUCTIONS FOR USE Apply only when air, material, and surface temperatures are between 50-90ºF (10-32ºC) and the relative humidity is below 85%. While mixing, wear a NIOSH approved dust mask. In a separate container, add the contents of the package to one gallon of any paint. Add less for surfaces in good condition and more for surfaces that require more hiding and texturing. Thoroughly mix to ensure that the contents are incorporated. For best results, keep the mixture as thick as possible for best coverage. Use a ⅜” to ¾” nap roller cover. Apply with light pressure and roll out on the surface. Less rolling will produce a better texture. A second coat of paint may be applied after partial or complete drying for greater hiding and a better texture.
CLEAN-UP
Clean hand and application tools with warm soapy water.
| 
