Instructions for Use
Score wallpaper with PaperTiger. The stripper will be more
effective with more holes in the wallpaper. Apply the DIF
Wallpaper Stripper to dissolve old paste and loosen
wallpaper. Hold Paper Scraper against the wall. Scrape off
loosened wallpaper, paste high points or bumps. Blade may
be reversed for new scraping edge. To remove residual
adhesive, re-apply DIF Wallpaper Stripper.
Rinse with clean water.
Instructions for Blade Reversal or Replacement
Pop off blade by pressing tabs forward and down.
Use caution when handling. Blades may be sharp.
Remove or replace blades as needed. Make sure the arrow
on the blade is facing forward. Align holes on the blade with
the posts on holder. Snap back into place. Be sure blade is
snug against the front bottom of tool.