Home > Paint & Stains > Minwax >

Minwax Wipe-On Poly

Wipe-On Poly
Wipe-On Poly


 
Minwax® Wipe-On Poly is a durable, clear polyurethane that provides protection with classic, hand-rubbed beauty. Minwax® Wipe-On Poly is applied with a cloth that avoids drips and brush marks.

Item# Item Name List Price Our Price Qty Add
40900 Minwax Wipe-On Poly Pint Gloss
$18.62
$15.58
40900-BOX Minwax Wipe-On Poly Pint Gloss - (Box of 6)
Save by the box: $14.62 ea
$111.72
$87.72
40910 Minwax Wipe-On Poly Pint Satin
$18.62
$15.58
40910-BOX Minwax Wipe-On Poly Pint Satin - (Box of 6)
Save by the box: $14.62 ea
$111.72
$87.72
60900 Minwax Wipe-On Poly Quart Gloss
$28.59
$24.71
60900-BOX Minwax Wipe-On Poly Quart Gloss - (Box of 4)
Save by the box: $23.18 ea
$114.36
$92.72
60910 Minwax Wipe-On Poly Quart Satin
$28.59
$24.71
60910-BOX Minwax Wipe-On Poly Quart Satin - (Box of 4)
Save by the box: $23.18 ea
$114.36
$92.72
Check the items you wish to purchase, then click


Technical Specs:
1. Surface must be dry and free of old finishes in poor condition, wax, grease, polish, dirt or other foreign matter.
2. Sand to obtain a smooth, uniform surface. Remove all dust with a cloth dampened with mineral spirits.
3. If desired, apply stain, such as Minwax® Wood Finish™, following the label directions for application instructions and dry times.
4. Shake Wipe-On Poly container thoroughly before use.
5. Put a liberal amount of Wipe-On Poly on a clean, soft, lint-free cloth and rub into the wood.
6. Allow to dry at least 2-3 hours. Sand entire surface lightly with very fine sandpaper (220 grit) or fine steel wool. Remove all sanding dust.
7. Apply a second coat in the same manner as the first. If a third coat is desired, repeat Step 6 before application.
8. Allow final coat to dry 24 hours before normal use.

Cleanup: For easy cleanup, use mineral spirits or paint thinner.

Coverage: Approximately 125 sq. ft. per quart.

Floors: Wipe-On Poly may be used to touch up small scratches on floors. Apply carefully as gloss level may not be identical to the existing floor finish.

Note: Wipe-On Poly is not recommended for general use on floors.


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Paint & Stains > Minwax
Paint & Stains