INSTRUCTIONS
1.
Prepare flooring and seam according to manufacturer’s instructions.
2.
Apply a bead of 2062 Seam Sealer to the foamed edges of the fiberglass sheets
to be seamed.
3.
Join the sheet edges by butting them together while the seam sealer is still wet.
4.
Wipe off any excess seam sealer with a damp cloth.
5.
Dried sealer can be removed with Taylor Touchdown #9 Adhesive Remover/Stripper.
Avoid soaking the flooring with solvent. Do not pour solvent directly onto flooring.
6.
Protect the seam area for a minimum of 6 hours to allow the seam sealer to dry.
PHYSICAL PROPERTIES
Base:
Latex polymer blend
Appearance:
Off-white liquid
Open Time:
Up to 1 hour depending on the porosity of the subfloor.
Shelf Life:
One year in unopened container at 70ºF.
Coverage:
225 linear feet per 8oz.
Flammability:
Non-flammable.
Complies with
NFPA Class A and UBC Class 1 as determined by
ASTM E84 and also passes the Pill Test.
Features:
Solvent-free, non-flammable, freeze/thaw stable to 10°F
(-12°C). Made with anti-microbial agents that
will provide its dry film with protection from fungal growth.
This protection is determined using the ASTMG21 test method.
Clean Up:
Use soap and water while wet. Use Taylor Touchdown #9 Adhesive
Remover/Stripper when dry.