Home » Rust-Oleum High Heat Paint
Rust-Oleum High Heat
Rust-Oleum High Heat

Rust-Oleum High Heat Paint

Rust-Oleum High Heat

Rust-Oleum High Heat Paint Gallon Black

SKU: 233967

Each

$92.94 ea

Save by the box

$179.68 Box of 2 $89.84 ea
Rust-Oleum High Heat Paint

Rust-Oleum High Heat Paint Quart Black

SKU: 7778502

Each

$29.01 ea

Save by the box

$108.88 Box of 4 $27.22 ea

Selected itemsItems: 0

Total: $0.00

Experience the ultimate protection for your metal items with Rust-Oleum High Heat Paint. This specialty paint is designed to safeguard against rust while preserving the aesthetic appeal of your belongings. With its durable and corrosion-resistant formula, this high heat paint can handle temperatures of up to 1000°F, making it the perfect choice for grills, stoves, engines, and more.

Say goodbye to worrying about heat damage and hello to a beautiful satin finish that adds an elegant touch to any indoor or outdoor space. Rust-Oleum High Heat Paint not only offers exceptional durability but also provides a long-lasting solution to protect your metal surfaces.

Crafted with expertise, this high heat paint ensures your items stay in pristine condition for years to come. Its reliable formula not only prevents rust but also withstands extreme temperatures, ensuring that your metal surfaces remain unscathed even under intense heat.

Whether you're a professional or a DIY enthusiast, trust Rust-Oleum High Heat Paint to deliver unmatched quality and performance.  Don't settle for anything less than the best for unrivaled protection and a flawless finish.
PAINTING CONDITIONS
Use outdoors or in a well ventilated area such as an open
garage. Use when temperature is between 50-90ºF (10-
32ºC) and humidity is below 85% to ensure proper drying.
Priming is not recommended. Do not use on metal directly
exposed to open flame or in direct contact with food, such
as a grill grate. If using sprays, avoid application in very
windy and dusty conditions. Cover surrounding area to
protect from spray mist.

SURFACE PREPARATION
Remove all dirt, grease, oil, salt and chemical
contaminants by washing the surface with a commercial
detergent, or other suitable cleaning method. Rinse with
fresh water and allow to thoroughly dry. Remove loose
paint and rust with a wire brush or sandpaper. Previously
coated surfaces must be sound and in good condition.
Smooth, hard, or glossy finishes should be scarified by
sanding to create a surface profile. Removal of old paint
by sanding, scraping or other means may generate dust or
fumes that contain lead. LEAD IS TOXIC. Contact the
U.S.EPA/Lead Information Hotline at 1-800-424-LEAD or
log on to www.epa.gov/lead.

APPLICATION
Sprays: Shake can vigorously for one minute after the
mixing ball begins to rattle. If mixing ball fails to rattle DO
NOT STRIKE CAN. Contact Rust-Oleum. Shake often
during use. Hold can upright 10-16” from surface and
spray in a steady back-and-forth motion, slightly
overlapping each stroke. Keep the can the same distance
from the surface. Keep the can in motion while spraying.
Apply two or more light coats a few minutes apart to avoid
drips and runs. Do not use near open flame.

Brush Goods: Mix thoroughly to ensure any settled
pigment is re-dispersed. Thin material only if necessary
with mineral spirits. For brush or roller application, thin no
more than 5%. Do not thin with gasoline, lacquer thinner,
turpentine, etc. Apply with a good quality brush, nap roller,
or conventional spray gun. A second coat is not
recommended.

DRY & RECOAT TIMES
Sprays: Dries to touch in 30 minutes and to handle in 1-2
hours. Allow paint to dry for 1 hour before heating.
Product may emit smoke and harmless odor.

Brush Goods: Dry and recoat times are based on 70ºF
and 50% relative humidity. Allow more time at cooler
temperatures. Dries to touch in 2-4 hours, to handle in
5-9 hours, and is fully dry in 24 hours. Allow paint to dry 24
hours before heating. When using the subject surface for
the first time, open windows and provide ventilation as the
new paint finish may emit smoke

CLEAN-UP
Sprays: Clean valve immediately after use by turning can
upside down and depressing spray button for 3-5 seconds
(some paint will be sprayed out, so be careful to not
inadvertently spray yourself or other objects). Clean-up
wet paint with xylene or mineral spirits. Properly discard
empty container. Do not burn or place in home trash
compactor.

Brush Goods: Clean brush, roller, and other tools with
mineral spirits. Dispose of soiled rags properly.

CLOGGING
If the valve clogs, twist and pull off spray tip and rinse in a
solvent such as mineral spirits. Do not insert any object
into can valve opening.

Rust-Oleum High Heat Paint

Selected itemsItems: 0

Total: $0.00

**Important Note** - You have selected a special order item that requires an extended shipping time. Also note, we cannot verify in stock status until we receive a shipping confirmation from the manufacturer as their stock is constantly changing. All sales are final on special order items, once ordered no changes, cancellations, returns, or refunds can be made, order carefully. By clicking OK below you acknowledge this exception.