Remove all dirt, grease, oil, salt or
other contaminants by washing the surface
with detergent orother suitable cleaner. Rinse thoroughly and allow to fully dry.
Scrape and wire brush or power tool clean to remove loose rust, scale, and
deteriorated coatings.Scarify previously painted coatings or smooth
surfaces to promote adhesion. Test for compatibility
with existing coating.
Apply only when air and surface temperature is above
50°F (10°C). Apply two or more light coats
a few minutes apart.
Use in properly ventilated areas. Spraying can
produce a fog that will travel. Protect surrounding
area, clothing and skin from overspray.
Do not use near open flame.