Wipe up excess oil and grease spills. Scrape and sweep away
dirt and loose contaminants on surface.
MIXING
Use EPOXYShield Heavy Duty Degreaser at full strength to clean
tough stains. Dilute 1:4 (1 quart [32 oz.] Degreaser in 1 gallon
[128 oz.] of water) for general purpose cleaning. To keep your
painted floor looking great, dilute 1:16 (1 cup [8 oz.] Degreaser in
1 gallon [128 oz.] of water). Stir diluted solution thoroughly. Avoid
splashing.
APPLICATION
Wet the surface first by spraying with a garden hose. Apply the
product full strength for tough stains or diluted for general purpose
cleaning on bare concrete or painted floors. Thoroughly scrub the
surface with a stiff bristle brush or broom. Wait 10-15 minutes to
allow the Degreaser to lift stains from the surface. Wipe up excess
Degreaser with rags or towels to keep the contaminants from
spreading. Rinse thoroughly with fresh water. Repeat applications
may be necessary for difficult stains. Remove excess water with a
squeegee or mop.
Storage and Disposal
Store at room temperature. Keep container closed when not in
use. Dispose of container and/or unused contents in accordance
with local, state, and federal regulations. Protect from freezing.
