other residues, dry, smooth and structurally sound.
damaged wallboard or plaster. Repair all unsound surfaces.
Before proceeding with any unusual conditions, consult your
adhesive or wallcovering supplier.
Can be tinted with universal tints; 4 oz./gal. maximum
Do not dilute.
Use only when the room temperature is above
50F. Apply an even coat of primer with a brush,
roller, or spraying system.
Hose: 1/2” I.D.
Tip Size: .015 and larger
Gun psi: 2000-2300
ULTRA PRIME® is dry and ready to hang
over in approximately one hour. Low temperature,
high humidity, and poor ventilation will slow down the drying
Before the primer dries, remove any excess
with clean water. Brushes and rollers should be
cleaned immediately after use with warm, clean
Product contains crystalline silica. Do not sand.