Up to approx. 280 square feet per gallon
Surface must be free from grease and other residues,
dry, smooth and structurally sound. Check surfaces
for paint bonding, loose wallcoverings, damaged wall-board
Repair all unsound surfaces. Prime all surfaces (including
oil-based coatings) with a Roman acrylic primer. Before
proceeding with any unusual conditions, consult your adhesive
or wallcovering supplier.
Use only when the room temperature is above 50F.
Apply a thin, even coat of adhesive with a pasting
machine, brush or roller. Avoid contact with the surface of
embossed, textured or delicate wallcoverings. For pasting
machine use, thin with a maximum of one pint of water per
gallon of adhesive.
Varies, depending on the temperature, ventilation and
humidity of the room.
Before the adhesive dries, remove the excess
with clean water. Additional effort may be required
if the adhesive is allowed to contact the surface of
embossed or textured vinyls.