Approximately 200 square feet per gallon
Surface must be free from grease and other residues,
dry, smooth and structurally sound. Check surfaces
for paint bonding, loose wallcoverings, damaged wallboard,
Repair all unsound surfaces. Prime all surfaces (including
oil-based coatings) with an acrylic primer. Before proceeding
with any unusual conditions, consult your adhesive or
Use only when the room temperature is above 50 degrees F.
Apply an even coat of adhesive with a roller or brush.
PRO-732 is recommended for roller application, and is formulated
to spread easily with a roller.
Avoid contact with the surface of embossed, textured, or
Varies, depending on the temperature, ventilation,and
humidity of the room.
Before the adhesive dries, remove the excess with
clean water. Additional effort may be required if
the adhesive is allowed to contact the surface of
embossed or textured vinyls.