Approximately 360 square feet per gallon
Surface must be free from grease and
other residues, dry, smooth and structurally sound. Check
surfaces for paint bonding, loose wallcoverings, damaged
wall-board or plaster. Repair all unsound surfaces. Prime all
surfaces (including oil-based coatings) with an acrylic wallpaper
primer, such as ROMAN® PRO-977,ULTRA PRIME®.
Before proceeding with any unusual conditions, consult your
adhesive or wallcovering supplier.
Do not dilute.
Use only when the room temperature is above 50F.
Apply an even coat of activator with a pasting
machine, brush or roller. Book according to the
wallcovering manufacturerʼs instructions.
Varies, depending on the temperature,
ventilation and humidity of the room.
Before the activator dries, remove any excess
with clean water.