Surface Preparation: Use Penofin Pro-Tech stripper at
temperatures when wood is not hot to the touch. To remove any debris,
sweep or use a power blower. Protect bordering metal and glass surfaces
and tape off any areas not being stripped. Dampen surrounding vegetation
Application: Shake product well before using. Do not thin or
blend with other products. Wet the surface to be stripped. Apply a
generous coat with a brush, roller or garden sprayer. Penofin Pro-Tech
Stripper will soften and or dissolve most coatings in 15 - 30 minutes.
Keep the wood surface wet by occasional misting. Scrub the surface with a
nonmetallic bristle brush or long-handled push broom. Rinse thoroughly
with water using a garden hose with a spray attachment (pressure washing
is not recommended). To achieve best results for perfect preparation
for Penofin wood finish, follow-up with Penofin Pro-Tech Cleaner (Step
#2) followed by Penofin Pro-Tech Brightener (Step #3).
ALWAYS WEAR RUBBER GLOVES, EYE PROTECTION AND SOLID SHOES WHEN
APPLYING. TEST ON A SMALL AREA TO ENSURE THE DESIRED RESULTS. CAUTION:
SURFACE WILL BE SLIPPERY. DO NOT ALLOW PRODUCT TO DRY ON THE SURFACE.
Average gallon coverage: About 125-200 square feet depending on surface type.
Cleanup and Storage: Thoroughly rinse all equipment with
water. Store any unused Penofin Pro-Tech Stripper in its original
container. Do not transfer to a metal container as it will cause a
chemical reaction. For disposal of unused product and empty containers,
contact your local household refuse collection service.