Surface Preparation: Sweep the surface with a stiff broom or
brush or use a power blower. Use Penofin Pro-Tech Stripper (Step #1) if
needed to remove old stain and Penofin Pro-Tech Cleaner (Step #2) to
prepare the area. Penofin Pro-Tech Brightener is most effective at
temperatures where wood is not hot to the touch. Protect bordering metal
surfaces. Dampen surrounding vegetation with water.
Application: Pour two cups of Penofin Pro-Tech Brightener
into one gallon of clean water and mix. Wet the surface with a garden
hose and sprayer. Using a plastic pump up garden sprayer, apply the
solution liberally. Wait 15 minutes and let it do the work for you. DO
NOT ALLOW THE SOLUTION TO DRY ON THE SURFACE. Scrub and rinse thoroughly
ALWAYS WEAR RUBBER GLOVES, EYE PROTECTION, AND SOLID SHOES WHEN
APPLYING. SURFACE WILL BE SLIPPERY. DO NOT INHALE POWDER. DO NOT MIX IN A
METAL CONTAINER. DO NOT STORE DILLUTED SOLUTION. DO NOT MIX WITH
CHLORINE BLEACH OR OTHER CHEMICALS. HARMFUL OR FATAL IF SWALLOWED. CAN
CAUSE EYE AND SKIN BURNS.
Average gallon coverage: Roughly 300-400 square feet depending on surface type. This container will make about 8 gallons of cleaner.
Cleanup and storage: Thoroughly rinse all equipment with
water. Store any Penofin Pro-Tech Brightener in its original container
in a dry place. Do not transfer to a metal container as it will cause a
reaction. For disposal of unused product and empty containers, contact
your local household refuse collection service.