PC-Woody Epoxy
PC-Woody Epoxy 6oz SKU: 08333-1 |
Each
Regular price
$14.79 ea
|
Save by the box
Regular price
$167.04 Box of 12
$13.92 ea
|
|
PC-Woody Epoxy 1.5 Oz 02333 SKU: 02333-1 |
Each
Regular price
$6.22 ea
|
Save by the box
Regular price
$70.20 Box of 12
$5.85 ea
|
|
PC-Woody Epoxy 10gal SKU: 90333-1 |
Each
Regular price
$780.88 ea
|
||
PC-Woody Epoxy 12oz SKU: 16333-1 |
Each
Regular price
$23.13 ea
|
Save by the box
Regular price
$260.40 Box of 12
$21.70 ea
|
|
PC-Woody Epoxy 48oz SKU: 64333-1 |
Each
Regular price
$69.10 ea
|
Save by the box
Regular price
$129.68 Box of 2
$64.84 ea
|
|
PC-Woody Epoxy 96oz SKU: 12833-1 |
Each
Regular price
$104.38 ea
|
PC-Woody® is an epoxy paste formulated to replace missing and rotted wood. It has structural strength greater than most wood. PC- Woody® is a permanent wood repair for interior and exterior applications. This epoxy is made from real wood and has many characteristics of wood. PC-Woody® formulation provides extended working time, for large and critical jobs, which allows the user time to reposition work or make changes. High “wet grab” or tack of PC-Woody® makes overhead and sidewall work easy without drip or sag. PC- Woody® demonstrates excellent resistance to all weather elements, mildew dry rot, UV light, fresh and salt water, and also chemicals present in pressure-treated wood.
***Note: PC-Woody® will not bond to wax paper, Teflon®, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combination. Test a small area when in doubt.
Directions:
Using separate knives to remove amount needed, mix equal parts A (off white) and B (light brown) on a flat clean surface until a uniform color is achieved. Surfaces to be bonded must be free of dirt, oil, rust, etc. For best results, rough up the surface PC-Woody® will be bonding to. Normally, no vice or clamp is needed. Prop or tape heavy objects to a wall or ceiling.
Apply PC-Woody® in any thickness to both sides of surface and bring together firmly. Be careful to insure that ample amount of PC-Woody® remains between the contact surfaces. Use screen wire or fiberglass cloth to reinforce large voids and gaps.
Denatured alcohol is excellent for smoothing applied PC-Woody®. Also use Denatured alcohol to clean surfaces before applying.
After cure: Paint, Stain, Drill, Machine, Sand, File, Tap, or Saw.