Home > Shop By Brands > PC Epoxy >

PC-Petrifier Epoxy

PC-Petrifier Epoxy
PC-Petrifier Epoxy


 
PC-Petrifier is a single component adhesive, formulated to fully penetrate and revitalize rotted wood. Modern technology has allowed us to develop a water base wood consolidant that is environmentally friendly. PC-Petrifier's® low viscosity allows deep penetration into soft rotted wood fiber, restoring old wood to near structural integrity. Seal and restore rotted soft wood fibers in window sills, sashes, frames, trim, decorative beams and columns, etc.

PC-Petrifier can also be used to prepare old wood for priming and painting. Apply to exposed wood grain to protect from damage. Not for structural repairs. If you have structural wood damage, please see our PC-Rot Terminator®. Do not use in conjunction with PC-Wood Guardian™ or other Borate products.

Directions:
Area to be treated must be dry, free of dirt, dust and grease. Remove loose paint varnish or flaky wood. Generously apply PC-Petrifier® by pouring, spraying, brushing or sponging onto area to be restored. Repeatedly saturate the rotted wood fibers to enable the deepest possible penetration. Let cure until solid and not tacky to the touch.


Item# Item Name List Price Our Price Qty Add
16444-1 PC-Petrifier Epoxy 16oz
$14.21
$12.50
16444-BOX PC-Petrifier Epoxy 16oz - (Box of 12)
Save by the box: $11.73 ea
$170.52
$140.76
12844-1 PC-Petrifier Epoxy 1gal
$78.44
$67.65
64044-1 PC-Petrifier Epoxy 5gal
$315.35
$255.99
08444-1 PC-Petrifier Epoxy 8oz
$9.41
$7.49
08444-BOX PC-Petrifier Epoxy 8oz - (Box of 12)
Save by the box: $7.06 ea
$112.92
$84.72
Check the items you wish to purchase, then click


Features:



Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 PC-Petrifier Epoxy gets an A+ from me. April 17, 2012
Reviewer: Chris from MI United States  
I’m a Hard Shell Gourd Artist and this product lets me push the limits of thin gourd to the max.  Not only does it stabilize the gourd making it stronger when a lot of cutting has been done.  It can also be used over the softer undershell to keep and protect the natural color.  It will darken the undershell while still wet, however once dry you can’t tell it has be coated with anything.  I love the fact that is it water base and I don’t have to worry about fumes to toxins.  I highly recommend this product for working on gourds or anything else you need to add stability to.

Was this review helpful to you?


Browse for more products in the same category as this item:

Shop By Brands > PC Epoxy
Shop By Brands