Home > Krud Kutter > Krud Kutter Adhesive Remover
Krud Kutter Adhesive Remover   Alternative Views:

A safe alternative to hazardous, solvent-based adhesive removers! Lifts off most glues & adhesives, carpet seam sealer & mastic. Also removes dirt, grease, grime, heel marks, & floor wax. Use after removing: tile, carpet, linoleum, laminate, wood & vinyl, flooring. Earth Friendly: Water-Based . Biodegradable . Non-Abrasive . Non-Flammable . Non-Toxic Product Numbers ending in "-R" are special order items that requires an extended shipping time averaging 10-20 days. Also note, we cannot verify in stock status until we receive a shipping confirmation from the manufacturer as their stock is constantly changing. All sales are final on special order items, once ordered no changes, cancellations, returns, or refunds can be made, order carefully. Item# Item Name List Price Our Price Qty Add AR32-1 Krud Kutter Adhesive Remover 32oz $15.01 $12.44 AR32-BOX Krud Kutter Adhesive Remover 32oz - (Box of 4) Save by the box: $11.67 ea $60.03 $46.68 336247-BOX-R Krud Kutter Adhesive Remover 8 Oz Spray - (Box of 6) Save by the box: $9.20 ea $79.66 $55.20 AR014-BOX-R Krud Kutter Adhesive Remover Gallon - (Box of 4) Save by the box: $26.37 ea $139.99 $105.48 Check the items you wish to purchase, then click Technical Specs: CAUTION Eye and skin irritant. In case of contact with eyes or skin, flush with water for 15 minutes. If irritation persists, seek medical attention. If swallowed, take large amounts of water. Do not induce vomiting. Get medical attention. DO NOT MIX THIS PRODUCT WITH ANY OTHER CHEMICALS. KEEP OUT OF REACH OF CHILDREN. CONTAINS: A proprietary blend of biodegradable surfactants, detergents, and emulsifiers, in a water-based solution. No petroleum solvents, bleach or ammonia. Extended Information: Directions for use: 1. Saturate the adhesive by applying a liberal amount directly onto the finish. 2. Allow time for the remover to work. It will loosen most finishes in 15-30 minutes. 3. Test scrape a small area to see if finish is ready for removal. 4. Scrape away the softened adhesive with a wide putty knife or scraper. 5. Multiple coats or stubborn finishes may require repeat applications. 6. For final clean-up, apply onto the surface and wipe clean. 7. Before installing new floor covering, allow surface to dry for 1 hour or more. COVERAGE: 50sq.ft./quart

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item: Krud Kutter Green Products > Green Cleaners Cleaning Products > Surface Cleaners & Degreasers Cleaning Products Green Products