Ready to use. Do not tint.
Shake well before using. Wood Brightener is supplied
as a concentrate. Mix 1 gallon of Wood Brightener
to 3 gallons of water for normal use. Spray wood with
pump up sprayer. Use synthetic brushes or rollers
only. Wood Brightener’s thick formula may be used
s. For maximum effectiveness, keep Brightener wet on
surface by occasionally misting with water. Allow
-30 minutes to restore natural color to wood. Wood
Brightener becomes extremely slippery once applied.
Work on small enough areas to avoid walking on
Test a small area by scrubbing with a bristle brush to
determine if the surface is ready for rinsing. When
ready, scrub the surface with a firm bristle brush or
long hand led push broom. Rinse thoroughly with
Water using a garden hose or pressure washer. Do
not exceed 1000 PSI when using a pressure washer.
Rinse any residue from plants.
Apply product at temperatures above 50° F. and
below 90° F. Do not apply in direct sunlight if
possible. Protect any aluminum surfaces (such as
window frames) to prevent discoloration. Product will
etch metal. If product makes contact with glass, rinse
thoroughly before it dries. Mist any nearby
vegetation with water before and after application.
100-200 sq. ft. per gallon and will vary depending on
the dilution of Wood Brightener to water.
Clean all tools with water.
SAFE USE & STORAGE:
When using, do not eat, drink or smoke. Wash hands
after use and before eating, drinking or smoking.
Product is corrosive, avoid contact with metals such
as aluminum. Do not transfer contents into a metal
container or unlabeled container. Store in a well
ventilated area. Keep container tightly closed when
not in use. Protect from freezing. For exterior use