Surface Preparation & Application:
Surface must be clean, dry and free of foreign material.
Mix gently before use.
Using a clean putty knife, press spackling into hole
or crack. Draw blade firmly across the surface to
remove excess material in one strike.
For a smoother finish, dip putty knife in
to water and lightly smooth spackling.
One coat should be sufficient for small repairs
May be painted within minutes with a latex paint.
Please follow paint manufacturer’s instructions for
If sanding is desired, or if an oil-based paint is
to be used, allow to drythoroughly (approximately 24
Clean tools immediately with water.
For Best Results:
Do not apply when temperatures are below 40°F.
Do not apply outside if rain is expected within 24 hours.
Do not use on floors or as a caulk, sealant or joint
filler over cracks and joints where expansion and
contraction may occur.
DO NOT USE AS A SKIM COAT.
For exterior application, first apply
exterior-grade primer, then apply
spackling and finish with coating
of quality exterior-grade paint.
Do not use for tuck pointing applications on brick.
Wash tools immediately after use with water. Dried
material must be cut of scraped away. Be sure
container lid is closed and tightly sealed. Store in
a cool, dry place away from extreme heat or cold.