Home > Shop By Brands > Dap >

DAP Silicone Sealant

DAP Silicone Sealant
DAP Silicone Sealant

Superior quality, multi-purpose sealant. Offers long-lasting flexibilty and excellent adhesion. Provide a weatherproof, watertight seal. Resists cracking, crumbling and chalking. Interior/exterior use. 50 Year Durability Guarantee. Meets Federal Specification TT-S-001543A, Class A.

Item# Item Name List Price Our Price Qty Add
08649-BOX DAP Silicone Sealant 10.1oz Almond - (Box of 12)
Save by the box: $11.35 ea
08643-BOX DAP Silicone Sealant 10.1oz Aluminum - (Box of 12)
Save by the box: $11.35 ea
08642-BOX DAP Silicone Sealant 10.1oz Black - (Box of 12)
Save by the box: $11.35 ea
08647-BOX DAP Silicone Sealant 10.1oz Bronze - (Box of 12)
Save by the box: $11.35 ea
08641-BOX DAP Silicone Sealant 10.1oz Clear - (Box of 12)
Save by the box: $7.43 ea
08646-BOX DAP Silicone Sealant 10.1oz White - (Box of 12)
Save by the box: $7.43 ea
Check the items you wish to purchase, then click

Extended Information:
Surface Preparation & Application:
Remove old caulk from surface. Prepare a clean, dry surface which is free of loose debris, dust, dirt, soap, oil or grease.
When using 2.8 oz squeeze tube, remove cap and puncture inner seal with other side of cap. Screw on
nozzle and cut at 45 angle to desired bead size.
When using 10.1 oz cartridge, cut nozzle at 45 angle to desired bead size. Puncture inner foil seal. Load
into caulking gun.
Apply sealant to surface, pushing sealant ahead of nozzle.
Smooth bead with finishing tool if necessary.
Clean up excess uncured sealant from surface and tools with mineral spirits. Excess cured sealant must be cut or scraped away. Wash hands with soap and water.
Allow 24 hours for sealant to cure. Sealant will not cure in totally confined spaces.
When applying to hard rubber or plastic surfaces, lightly sand or roughen surface before application to
maximize adhesion.
When bonding two surfaces together, always clamp until cured, if possible.
When using sealant to form weather-stripping or other formed rubber parts, place wax paper over sealant to prevent sticking to mating piece until it has cured.
Reseal for reuse.

For Best Results:
Application temperature is between -35F and 140F.
Joint width should not exceed 1/2. If joint depth exceeds 1/2, use backer rod material.
Not paintable. Paint surfaces before sealing.
Not recommended for continuous underwater use, below grade use, use on wet surfaces, oily woods,
stovepipes or chimneys. Not for fireplace applications, tuck pointing, butt joints, structural glazing or
repairing surface defects.
Not recommended for use on cementitious materials or surfaces that might bleed oils, plasticizers or
solvents. Substrates made of methylmethacrylate, polycarbonate, polypropylene, polyethylene and
polytetrafluoroethylene do not allow for best adhesion and compatibility with sealant. Try test area before
Not recommended for use on brass, copper, magnesium, zinc, iron, galvanized metals or other surfaces
prone to attack by weak acids.
Do not use where abrasion and physical abuse are encountered.
Store in temperatures below 90F in a dry place.

Shelf Life: 18 months from manufactured date
Coverage: 10.1 fl. oz.: 55 linear ft. at a 3/16" bead size
                  2.8 fl. oz.: 15 linear ft. at a 3/16 bead size

Clean Up:
Remove excess uncured sealant from surfaces and tools with mineral spirits. Do not use mineral spirit to clean skin. Wash hands with soap and water. Cured sealant must be cut or scraped away.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop By Brands > Dap
Painting Supplies > Caulk & Silicone
Painting Supplies
Shop By Brands