Stir thoroughly before use. If using squeezing
tube, knead tube before use and cut nozzle to
desired opening size.
Apply with a clean putty knife.
in water and lightly smooth spackling.
One application is usually sufficient for small
repairs. For repairs deeper than 1/4, apply two or more
layers allowing spackling to dry between applications.
May be sanded or painted in 1 to 5 hours depending
on temperature, humidity and depth of fill.
Wet sanding is recommended to avoid generation of dust.
Clean tools immediately with water.
Ensure that CrackSHOTฎ Spackling Paste is
thoroughly dry before sanding or applying oil-based paint.
Spackling may be painted immediately upon
drying with a quality latex paint.
For Best Results:
Do not apply when temperatures are below 50ฐF.
Do not apply outside if rain is expected within 24 hours.
Do not use on floors or as a caulk, sealant or joint
filler over cracks and joints where expansion and
contraction may occur.
DO NOT USE AS A SKIM COAT.
For exterior applications, always topcoat with a
If a textured finish is desired, add clean sand to
spackling compound prior to application.
Do not use for tuck pointing applications on brick.
For larger areas to be patched on bare concrete, use
a latex fortified Portland cement-based dry mix.
Clean Up & Storage:
Wash tools immediately after use with water. Be sure
container lid/cap is closed and tightly sealed. Store in a
cool, dry place.