Home > Shop By Brands > Dap >

DAP 3.0 Advanced Self-Leveling Concrete Sealant

DAP 3.0 Advanced Self-Leveling Concrete Sealant
DAP 3.0 Advanced Self-Leveling Concrete Sealant

DAP® 3.0™ Advanced Self-Leveling Concrete Sealant is an advanced concrete and masonry sealant specially formulated with innovative Kwik Dry® Technology allowing it to be exposed to water after just three hours without washing out, unlike other caulks & sealants which may require a 24–36 hour waiting period. The self-leveling formulation means no tooling is required. It is ideal for filling and sealing horizontal cracks & gaps in sidewalks, concrete driveways, above-ground foundations, patios, concrete steps, garage floors & other concrete surfaces. DAP® 3.0™ Advanced Self-Leveling Concrete Sealant truly offers the best of the best in sealant quality.

Item# Item Name List Price Our Price Qty Add
18370-1BOX DAP 3.0 Advanced Self-Leveling Concrete Sealant Gray - (Box of 12)
Save by the box: $6.84 ea
(Out of Stock)
Check the items you wish to purchase, then click

* Permanently waterproof & weatherproof seal.
* Cured sealant that's mold & mildew resistant.
* Outstanding flexibility & adhesion to a wide range of substrates without cracking or shrinking.
* Superior paintability.
* Extreme weather & temperature applications range: -35°F to 140°F.
* Withstands foot & vehicle traffic after fully cured.
* Low odor & low VOC content.
* Lifetime guarantee.

Extended Information:
Surface Preparation & Application:
1. Surface must be clean, dry and free of old caulk, dirt and debris.
2. Unscrew outer nozzle.
3. Cut inner nozzle at the thread point furthest away from the base of the nozzle.
4. Re-attach outer nozzle, & cut nozzle at a 45° angle to desired bead size.
5. Load cartridge into caulking gun. If gap is more than 1⁄2 inch deep,
insert closed cell backer rod beforefilling with sealant.
6. Apply by filling joints from bottom.
7. Protect sealant from rain or water for at least three hours before exposing to water. Sealant
surface may still be tacky.
8. Clean up excess uncured sealant from surface and tools with mineral spirits. Wash hands with soap and water. Scrape or cut away excess cured sealant.
9. Paintable with most acrylic latex paints in 3 hours (surface may still be tacky). Use an acrylic primer for oil-based paints.
10. Store partially used cartridge in a cool dry place. Use the DAP CAP™ (purchased separately) to smooth,seal and finish caulk for professional results with no mess. Reseals cartridge for storage and reuse. When ready to use again, remove the cured material at the tip or cut the tip back. Use as soon as possible, preferably within a month.

For Best Results:
• Application temperature range is between 20°F and 120°F.
• Use on horizontal surfaces only.
• Not recommended for continuous underwater use or on stovepipes.
• Store product below 80°F (27°C) away from extreme heat and moisture.
• Certain porous substrates such as concrete may require primer for best adhesion.

Shelf Life: 12 months if unopened and stored in cool dry place
Coverage: 49 linear feet at 3/16” diameter bead

Clean Up:
Before curing, remove excess material from surface and tools with mineral spirits. Clean hands with soap and water. After product has cured, excess material must be cut or scraped away.

Average Customer Review: Average Customer Review: 4 of 5 4 of 5 Total Reviews: 1 Write a review.

  1 of 1 people found the following review helpful:
4 of 5 Beware of the color! July 17, 2010
Reviewer: cliff hammer from Portland, OR United States  
My 19 year old 2-car garage developed a crack in the middle of the floor across both slabs.This product works as advertised, but the color is not what it reads on the tube! The tube reads GRAY,but the actual color is Almond.Looks like Almond color latex paint when being applied.After 4 days it's still the same color.

Was this review helpful to you?

Browse for more products in the same category as this item:

Shop By Brands > Dap
Painting Supplies > Spackle & Patching
Painting Supplies
Shop By Brands