Home » Cantex 5240102 3/4 in. Pull Elbow with 1/2 in. Reducers
Cantex 5240102 3/4 in. Pull Elbow with 1/2 in. Reducers
Cantex 5240102 3/4 in. Pull Elbow with 1/2 in. Reducers

Cantex 5240102 3/4 in. Pull Elbow with 1/2 in. Reducers

Cantex 5240102 3/4 in. Pull Elbow with 1/2 in. Reducers

Cantex 5240102 3/4 in. Pull Elbow with 1/2 in. Reducers

SKU: 5240102C-BOX-E

Save by the box

$55.58 Box of 10 $5.55 ea

Selected itemsItems: 0

Total: $0.00

  • CANTEX 5240102 is a 3/4 in. Pull Elbow that is used to effect a sharp 90 degree turn in a conduit run where wires must be continuously pulled around the turn. 5240102 becomes a ½ in Pull Elbow with the included reducers.

This Item Cannot be Shipped Internationally.
  • Provides a smooth surface that will not damage wiring. Not used for wire splicing.
    • Includes two reducer bushings (part number 5142220) to adjust size to 1/2 in.
    • For use with Schedule 40 & 80 conduit
    • Includes lid, gasket, and screws
    • UL listed
    • Made in USA

Cantex 5240102 3/4 in. Pull Elbow with 1/2 in. Reducers

Selected itemsItems: 0

Total: $0.00

**Important Note** - You have selected a special order item that requires an extended shipping time. Also note, we cannot verify in stock status until we receive a shipping confirmation from the manufacturer as their stock is constantly changing. All sales are final on special order items, once ordered no changes, cancellations, returns, or refunds can be made, order carefully. By clicking OK below you acknowledge this exception.