Zinsser Covers Up Ceiling Tile Paint 03688
|
Zinsser Covers Up Ceiling Tile Paint 13Oz Spray 03688 SKU: 03688-13 |
Each
Regular price
$11.18 ea
|
Save by the box
Regular price
$62.94 Box of 6
$10.49 ea
|
COVERS UP™ Stain Sealing Ceiling Paint is a low odor vertical aerosol that is a stain killer and ceiling touch-up paint in one. ZINSSER’s stain blocking primer technology is incorporated into this new generation product that offers a flat white finish which matches most new acoustical ceiling tiles and white ceiling paints.
COVERS UP is a great stain blocking primer for any ceiling surface. It’s the perfect “touch up” paint when you don’t want to repaint the entire ceiling due to spot damage. One coat of COVERS UP permanently blocks and seals most common ceiling stains – stains from water, nicotine, smoke, graffiti – and more.
Its convenient vertical spray tip and low odor, high-hide formula also make COVERS UP ideal for priming or touching up other common overhead surfaces, including crown moldings, light fixtures, HVAC ductwork, vents, valances and overhead pipes. The full 13-ounce aerosol is designed to meet the demands of professional and larger home improvement projects.
COVERS UP’s non-yellowing oil-base formula dries in just 30 minutes and can be applied under or over any oil-base or water-base topcoat. When used as a primer COVERS UP can be top coated with a ceiling paint in just two hours.
This Item Can NOT Be Shipped Internationally
Recommended Uses
Apply as a primer/finish to interior acoustic ceiling tiles
or painted ceilings, light fixtures, HVAC ductwork &
or painted ceilings, light fixtures, HVAC ductwork &
vents, overhead pipes & conduit, or anywhere an overhead
high hiding stain sealing primer or spot finish is needed.
high hiding stain sealing primer or spot finish is needed.
Interior Substrates
New, primed or previously painted ceiling tiles, drywall,
cured plaster, cement, stucco, wood (pine, fir, birch,
cured plaster, cement, stucco, wood (pine, fir, birch,
oak and plywood), aluminum, iron, steel and galvanized metal,
PVC, glossy laminates and other interior surfaces.
PVC, glossy laminates and other interior surfaces.
Paint or Primer for All Ceilings
Dries flat and will match some white painted ceilings.
Use as a stain blocking primer for any ceiling
Use as a stain blocking primer for any ceiling
surface. May be topcoated with ceiling paint in two hours when
used as a primer.
used as a primer.
Surface Preparation
Surfaces should be clean, dry, sound and free of dust, dirt, excess
ive chalky material, grime, grease, oil, wax, mildew, wallpaper
adhesive or any contamination that may interfere with adhesion.
If unsure, always wash surface with a household ammonia and
water solution, appropriate cleaning solution, or solvent (Do not
use TSP as a cleaner). Remove any unsoundly adhered coatings.
Sand any remaining paint film edges smooth with the surface.
Attempt to remove existing stains by washing, sanding, scraping, etc.
Remove interior mildew with an interior mildew cleaner. Countersink
If unsure, always wash surface with a household ammonia and
water solution, appropriate cleaning solution, or solvent (Do not
use TSP as a cleaner). Remove any unsoundly adhered coatings.
Sand any remaining paint film edges smooth with the surface.
Attempt to remove existing stains by washing, sanding, scraping, etc.
Remove interior mildew with an interior mildew cleaner. Countersink
nexposed nail heads, spot-prime and fill with Zinsser Ready Patch®
spackling compound. Wire brush rusty areas.
spackling compound. Wire brush rusty areas.
WARNING! If you scrape, sand or remove old paint,
you may release lead dust. LEAD IS TOXIC.
Contact the National Lead Information Hotline at
1-800-424-LEAD or log on to www.epa.gov/lead.
Application Directions
Shake can until ball inside rattles, then continue shaking for one minute.
If ball does not rattle, do not strike can. Repeat shaking periodically during use.
Test spray pattern on scrap surface before using. Spray 10-
Test spray pattern on scrap surface before using. Spray 10-
12 inches from surface. Mask off nearby objects. Apply with short dusting’ strokes.
Will seal most stains. When finished, clean valve by holding can upside down
and spraying until clear gas comes out. To clear clogged spray tip, remove
from can and clean with pin.
Will seal most stains. When finished, clean valve by holding can upside down
and spraying until clear gas comes out. To clear clogged spray tip, remove
from can and clean with pin.
Application conditions
Apply within the following ranges: Humidity 0% to 85%
Temperature 40° F to 90°F (4°C to 32°C)
Drying Time
-Dries to the touch in 30 minutes. Allow a minimum of 2 hours
dry time before recoating or applying topcoat. Lower
dry time before recoating or applying topcoat. Lower
temperature and higher humidity will prolong dry time of the product.
Coverage
Approximately 15 square feet per 13 oz aerosol can. Surface porosity
may reduce square foot coverage and require a second coat.
may reduce square foot coverage and require a second coat.
Cleanup
Clean spills and drips with a rag dampened in mineral spirits.
Disposal
Dispose of unused or unwanted product in accordance with
local laws regulating water-based coatings.
local laws regulating water-based coatings.