PC-Woody Epoxy

PC-Woody Epoxy

PC-Woody Epoxy 6oz

SKU: 08333-1

Each

Regular price $14.79 ea

Save by the box

Regular price $167.04 Box of 12 $13.92 ea
PC-Woody Epoxy

PC-Woody Epoxy 1.5 Oz 02333

SKU: 02333-1

Each

Regular price $6.22 ea

Save by the box

Regular price $70.20 Box of 12 $5.85 ea
PC-Woody Epoxy

PC-Woody Epoxy 10gal

SKU: 90333-1

Each

Regular price $780.88 ea
PC-Woody Epoxy

PC-Woody Epoxy 12oz

SKU: 16333-1

Each

Regular price $23.13 ea

Save by the box

Regular price $260.40 Box of 12 $21.70 ea
PC-Woody Epoxy

PC-Woody Epoxy 48oz

SKU: 64333-1

Each

Regular price $69.10 ea

Save by the box

Regular price $129.68 Box of 2 $64.84 ea
PC-Woody Epoxy

PC-Woody Epoxy 96oz

SKU: 12833-1

Each

Regular price $104.38 ea

Selected itemsItems: 0

Total: $0.00

PC-Woody® is an epoxy paste formulated to replace missing and rotted wood. It has structural strength greater than most wood. PC- Woody® is a permanent wood repair for interior and exterior applications. This epoxy is made from real wood and has many characteristics of wood. PC-Woody® formulation provides extended working time, for large and critical jobs, which allows the user time to reposition work or make changes. High “wet grab” or tack of PC-Woody® makes overhead and sidewall work easy without drip or sag. PC- Woody® demonstrates excellent resistance to all weather elements, mildew dry rot, UV light, fresh and salt water, and also chemicals present in pressure-treated wood. ***Note: PC-Woody® will not bond to wax paper, Teflon®, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combination. Test a small area when in doubt. Directions: Using separate knives to remove amount needed, mix equal parts A (off white) and B (light brown) on a flat clean surface until a uniform color is achieved. Surfaces to be bonded must be free of dirt, oil, rust, etc. For best results, rough up the surface PC-Woody® will be bonding to. Normally, no vice or clamp is needed. Prop or tape heavy objects to a wall or ceiling. Apply PC-Woody® in any thickness to both sides of surface and bring together firmly. Be careful to insure that ample amount of PC-Woody® remains between the contact surfaces. Use screen wire or fiberglass cloth to reinforce large voids and gaps. Denatured alcohol is excellent for smoothing applied PC-Woody®. Also use Denatured alcohol to clean surfaces before applying. After cure: Paint, Stain, Drill, Machine, Sand, File, Tap, or Saw.

PC-Woody Epoxy

Selected itemsItems: 0

Total: $0.00

**Important Note** - You have selected a special order item that requires an extended shipping time. Also note, we cannot verify in stock status until we receive a shipping confirmation from the manufacturer as their stock is constantly changing. All sales are final on special order items, once ordered no changes, cancellations, returns, or refunds can be made, order carefully. By clicking OK below you acknowledge this exception.