Kilz Premium Primer/Sealer

Kilz Premium Primer/Sealer

Kilz Premium Primer/Sealer Gallon

SKU: 13001-1

Each

Regular price $49.12 ea

Save by the box

Regular price $92.10 Box of 2 $46.05 ea
Kilz Premium Primer/Sealer

Kilz Premium Primer/Sealer Quart

SKU: 13002-1

Each

Regular price $17.54 ea

Save by the box

Regular price $65.76 Box of 4 $16.44 ea

Selected itemsItems: 0

Total: $0.00

KILZ Premium primer is a superior quality fast drying, low odor, zero VOC water-base, primer-sealer-stainblocker. Formulated to minimize problems caused by color changes, minor stains, surface textures and porosity differences, it offers excellent adhesion and provides a mildew resistant coating. KILZ Premium Features: * High hide formula/blocks previous colors & medium stains * Seals surfaces for uniform finish * Mildew-resistant * Zero VOC/low odor * Stains: water, smoke, tannin, ink, pencil, felt-marker and grease * Odors: pet, smoke, food * Use on: wood, ferrous metals, cast iron, wrought iron, steel cured plaster, wallpaper, masonry, CMU, under or over latex or oil based paint


Warning: Cancer & Reproductive Harm:
www.P65Warnings.ca.gov
PRODUCT SPECIFICATIONS
Base Water
Int/Ext Int/Ext
Color White
Coverage - Low 300 sq. ft.
Mils Wet 5.3
Mils Dry 2.2
Coverage - High 400 sq. ft.
Mils Wet 4
Mils Dry 1.6
Finish @ 85o < 10
Min Application Temp 50oF (10oC)
Max Application Temp 90oF (32oC)
Dry To Touch 30 min
Dry To Recoat 1 hour
Max Tint 2 oz
VOC 95 g/L
Brush Nylon / Poly
Roller - Smooth 3/8" - 1/2" nap
Roller - Porous 1/2" - 3/4" nap
Spray Tip .015" - .021"
Spray Filter 60 mesh
Spray Pressure 2,500 - 3,000
Volume Solids 54.7% (+/-) 2%
Weight Solids 40.5% (+/-) 2%
Viscosity 95 - 105 KU
Flashpoint N/A

WHERE TO USE

Use on properly prepared interior and exterior surfaces, such as:

  • Brick
  • Painted Metal
  • Properly Prepared Glossy Surfaces†
  • Drywall
  • Paneling
  • Stucco
  • Masonry
  • Plaster
  • Wood

SURFACE PREPARATION†
  • The surface must be clean, free of dust, grease, wax, peeling paint and wallpaper paste. If washing is necessary use a non-soapy detergent or a TSP substitute. Rinse well and allow to dry.
  • For maximum adhesion, scrape off loose paint and scuff sand the surface thoroughly before priming. On glossy surfaces: scuff sand the surface thoroughly before priming.
  • Unpainted, exterior wood exposed to sun and/or moisture longer than 2-4 weeks must be cleaned and sanded before priming.
  • Wash the area with a mildew remover, rinse with water and allow to dry before priming.
  • KILZ PREMIUM may be used on clean, dry, aged masonry surfaces. New masonry must be allowed to cure (dry) at least 30 days before applying KILZ PREMIUM.
  • It is critical to clean smoke damaged surfaces thoroughly before priming. Primary Recommendation: KILZ ORIGINAL or KILZ ODORLESS.


APPLICATION
  • Eye protection is recommended.
  • A small amount of water may be added for spray applications, but do not thin for stainblocking applications.
  • Stir thoroughly before and occasionally during use.
  • Apply using a brush, roller or sprayer.
  • Only apply if surface, air and product temperatures are between 50°-90°F.
  • Prime the entire surface to ensure a uniform appearance of the topcoat.
  • After priming, test for stain bleed-through by applying the topcoat to a small section. If the stain bleeds through the topcoat, apply a second coat of primer and test again before topcoating the entire area. If bleeding continues, a longer dry time is needed before topcoating.
  • Tinting is not recommended for stainblocking applications. KILZ PREMIUM may be tinted with up to 2 ounces of universal colorant per gallon for non-stainblocking projects. Tinting to a lighter shade than the topcoat is recommended.
  • Coverage is up to 300 square feet per gallon on porous surfaces; up to 400 square feet per gallon on smooth, nonporous surfaces.


DRY TIME at 77°F (25°C), 50% RH
  • Dries to the touch in 30 minutes.
  • Can be recoated or topcoated in one hour with latex or oil-based paint.
  • Application at lower temperatures, in high humidity or in poorly ventilated areas will affect dry time.


CLEAN UP & DISPOSAL
  • Clean equipment and paint spatters with warm, soapy water.
  • Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations.
  • To recycle or properly dispose of paint or primer in your community, call 1-800-CLEANUP.

Kilz Premium Primer/Sealer

Selected itemsItems: 0

Total: $0.00

**Important Note** - You have selected a special order item that requires an extended shipping time. Also note, we cannot verify in stock status until we receive a shipping confirmation from the manufacturer as their stock is constantly changing. All sales are final on special order items, once ordered no changes, cancellations, returns, or refunds can be made, order carefully. By clicking OK below you acknowledge this exception.