Home » Gardner Bender 1-3/32 in. Heavy-Wall Heat Shrink Tubing HWT-1138
Gardner Bender 1-3/32 in. Heavy-Wall Heat Shrink Tubing HWT-1138
Gardner Bender 1-3/32 in. Heavy-Wall Heat Shrink Tubing HWT-1138

Gardner Bender 1-3/32 in. Heavy-Wall Heat Shrink Tubing HWT-1138

Gardner Bender 1-3/32 in. Heavy-Wall Heat Shrink Tubing HWT-1138

Gardner Bender 1-3/32 in. Heavy-Wall Heat Shrink Tubing HWT-1138

SKU: HWT-1138-BOX-E

Save by the box

$73.08 Box of 10 $7.30 ea

Selected itemsItems: 0

Total: $0.00

  • For flame-retardant, corrosion-resistant insulation around electrical wire, use the Gardner Bender 1-3/32 in. Heavy-Wall Heat Shrink Tubing. This tubing is submersible to accommodate direct burial installations and shrinks at 250 degrees Fahrenheit.
This Item Cannot be Shipped Internationally.
  • Impact, abrasion, and corrosion-resistant polyolefin construction
  • Submersible and ideal for direct burial installations
  • Inner adhesive bonds to plastics, rubber, neoprene, steel and polyethylene
  • Continuous operating temperature: -55 deg C (-67 deg F) 120 deg C (248 deg F)
  • Shrink temperature: 120 deg C (250 deg F)
  • 3:1 shrink ratio from starting ID (inner diameter) size
  • 1-1/8 In. (28.6 mm) Pre-Shrink Diameter to 3/8" (10 mm) Post-Shrink Diameter

Gardner Bender 1-3/32 in. Heavy-Wall Heat Shrink Tubing HWT-1138

Selected itemsItems: 0

Total: $0.00

**Important Note** - You have selected a special order item that requires an extended shipping time. Also note, we cannot verify in stock status until we receive a shipping confirmation from the manufacturer as their stock is constantly changing. All sales are final on special order items, once ordered no changes, cancellations, returns, or refunds can be made, order carefully. By clicking OK below you acknowledge this exception.