DAP Alex Plus Acrylic Latex Caulk with Silicone

image_5727

DAP Alex Plus Acrylic Latex Caulk with Silicone 10.1 oz Clear

SKU: 18156-BOX

Save by the box

Regular price $53.76 Box of 12 $4.48 ea
DAP Alex Plus Acrylic Latex Caulk with Silicone

DAP Alex Plus Acrylic Latex Caulk with Silicone 10.1 oz White

SKU: 18152-BOX

Save by the box

Regular price $42.36 Box of 12 $3.53 ea
DAP Alex Plus Acrylic Latex Caulk with Silicone

DAP Alex Plus Acrylic Latex Caulk with Silicone 5.5 oz Apex Plus White

SKU: 18128-BOX

Save by the box

Regular price $44.28 Box of 12 $3.69 ea

Selected itemsItems: 0

Total: $0.00

Superior quality, multi-purpose acrylic latex caulk plus silicone. Highly flexible and durable. Excellent adhesion. Cured caulk is mildew resistant. Interior/exterior use. Paintable. Water clean-up. 35 Year Durability Guarantee. Exceeds ASTM Specification C 834.
Performance Characteristics:
• Exceeds ASTM C834.
• Contains silicone to improve adhesion and flexibility.
• Resists cracking and chalking.
• Tack-free in 30 minutes.

Surface Preparation & Application:
1. Surface must be clean, dry and free of old caulk, dirt, dust, debris and grease.
2. Remove cap (from tube). Cut nozzle at a 45° angle to desired bead size.
3. Load into caulking gun (if using the 10.1 oz. cartridge).
4. Fill gap with caulk, pushing caulk ahead of nozzle.
5. If necessary, smooth bead with finishing tool.
6. Clean up excess uncured caulk with a damp sponge before it skins over.
Cured caulk must be cut or scraped away.
7. Allow to dry 2 hours (longer in cool/humid conditions) before painting
with latex or oil-based paints.
8. Reseal cartridge or squeeze tube for storage and reuse.

For Best Results:
• Apply in temperatures above 40ºF.
• Do not apply when rain or freezing temperatures are forecasted before full cure can occur.
• Do not use below waterline or for marine or automotive applications.
• Do not use for filling butt joints, surface defects, for tuck pointing or expansion joints.
• Joint size should not exceed 1/2” wide x 1/2” deep. If joint depth exceeds 1/2” use backer rod material.
• Store away from extreme heat or cold.

Clean Up:
Clean up excess uncured caulk with a damp sponge before it skins over. Wash hands with warm water and soap. Excess dried caulk must be cut or scraped away.

Coverage:
10.1 fl. oz. = 56 linear ft. at a 3/16" diameter bead
(three average doors or four average windows)


DAP Alex Plus Acrylic Latex Caulk with Silicone

Selected itemsItems: 0

Total: $0.00

**Important Note** - You have selected a special order item that requires an extended shipping time. Also note, we cannot verify in stock status until we receive a shipping confirmation from the manufacturer as their stock is constantly changing. All sales are final on special order items, once ordered no changes, cancellations, returns, or refunds can be made, order carefully. By clicking OK below you acknowledge this exception.