Bondo Fiberglass Resin

Whether you're fixing small gaps in your pool or larger cracks in your boat, Bondo Fiberglass Resin provides a strong and reliable fix for various surfaces like fiberglass, metal, wood, and concrete.

With Bondo Fiberglass Resin, you can say goodbye to leaks and unsightly damage. Its powerful formula ensures long-lasting results that stand up to the test of time. Patch up holes, splits, gauges, seams, and even deep cracks with ease. For enhanced structural strength, consider using Fiberglass Cloth or Fiberglass Mat (not included) in combination with the resin.

What sets this fiberglass resin apart is its exceptional versatility. From repairing wheelbarrows to sheds and play equipment, Bondo Fiberglass Resin is a go-to solution for all your repair needs. No matter the material or surface, you can trust Bondo to deliver a seamless and professional finish.

At ThePaintStore.com, we take pride in offering top-quality products like Bondo Fiberglass Resin and a wide varitety of online paint supplies at wholesale prices for over 18 years. Trust our expertise and commitment to providing cost-effective solutions to professionals, DIY enthusiasts, and businesses alike.

Don't let damaged surfaces hold you back. Choose Bondo Fiberglass Resin for reliable repairs that withstand the test of time. Order yours today and experience the difference firsthand.

Directions for Use
1. Clean repair area with acetone or warm, soapy water to remove all dirt, grease, oil and contaminates. Let dry completely.

2. Sand the surface with 3M™ Sandpaper 80 grit to remove all primer, paint, rust or gel-coat. Remove all dust created from sanding. Re-clean the surface following Step #1.

3. Pre-cut several pieces of fiberglass cloth or mat to extend 2-3 inches beyond repair area. Wearing gloves is recommended for the next steps.

4. Mix the Bondo® All Purpose Fiberglass Resin in a paper cup with the Bondo® Fiberglass Resin Hardener. For small applications use 10 drops of hardener per ounce of resin. Working time will be 10 to 12 minutes. For larger applications, use half of the fiberglass resin hardener supplied, to half of the resin container. Using large amounts at one time will cut the working time in half of the mixed resin. Do not mix the entire container with liquid hardener. Mix thoroughly.

5. Brush a coat of the mixed resin on the damaged area extending 2-3 inches beyond repair. Place the first layer of fiberglass cloth or mat onto the resin application and immediately apply another coat of resin over the fiberglass cloth or mat. Continue applying additional layers of fiberglass and resin as needed while the first coat is still sticky or wet. If the surface has dried hard and is no longer sticky, sand with 80 grit sandpaper prior to applying additional layers of resin and fiberglass cloth or mat.

6. Allow two hours to fully cure. Once cured, sand the surface with 3M™ Sandpaper 80 grit. Feather the edge of the repaired area with 3M™ Sandpaper 180 grit to blend the edges.

7. The surface is now ready for paint, primer or gel coat per the manufacturers’ recommendation.

8. Clean up using acetone or lacquer thinner. Store any unused hardener securely under the dome. KEEP OUT OF REACH OF CHILDREN.