(Your shopping cart is empty)
Search 



 
CHOOSE YOUR
CURRENCY
Note: Not live rates
For reference purposes only
All sales in US Dollars


Join our mailing list!










  Home > ZAR >

  UGL Aqua ZAR® Water-Based Polyurethane
  UGL Aqua ZAR® Water-Based Polyurethane
UGL Aqua ZAR® Water-Based Polyurethane


Bookmark and Share
 
Alternative Views:

UGL Aqua ZAR® Water-Based Polyurethane  is a full-bodied formula that brushes on like a conventional polyurethane giving a high film build for maximum durability and beauty. Non-yellowing. Dries crystal clear. Dries to the touch in 30 minutes. Cleans-up with warm, soapy water. Meets environmental standards for low emissions of solvent vapors.

Item# Item Name List Price Our Price Qty Add
ZAR344-G-1 UGL Aqua ZAR® Water-Based Polyurethane Gallon Clear Antique Flat 344 $81.87 $68.94
ZAR344-G-1BOX UGL Aqua ZAR® Water-Based Polyurethane Gallon Clear Antique Flat 344 - (Box of 2) Save by the box: $64.64 ea $163.74 $129.27
ZAR324-G-1 UGL Aqua ZAR® Water-Based Polyurethane Gallon Clear Gloss 324 $81.87 $68.94
ZAR324-G-1BOX UGL Aqua ZAR® Water-Based Polyurethane Gallon Clear Gloss 324 - (Box of 2) Save by the box: $64.64 ea $163.74 $129.27
ZAR325-G-1 UGL Aqua ZAR® Water-Based Polyurethane Gallon Clear Satin 325 $81.87 $68.94
ZAR325-G-1BOX UGL Aqua ZAR® Water-Based Polyurethane Gallon Clear Satin 325 - (Box of 2) Save by the box: $64.64 ea $163.74 $129.27
ZAR345-G-1 UGL Aqua ZAR® Water-Based Polyurethane Gallon Clear Semi-Gloss 345 $81.87 $68.94
ZAR345-G-1BOX UGL Aqua ZAR® Water-Based Polyurethane Gallon Clear Semi-Gloss 345 - (Box of 2) Save by the box: $64.64 ea $163.74 $129.27
Check the items you wish to purchase, then click


Extended Information:
Do not apply over wood fillers or finishes containing wax or stearates. Do not use steel wool. Do not thin.

COMPOSITION: Water base
SHEEN: Gloss  90+ Semi-Gloss  70±3 Satin  45±3 Antique Flat 2±3 %
WEIGHT SOLIDS: 32-34%
% VOLUME SOLIDS: 30-32%
DENSITY (LBS./US GAL.): 8.6-8.7
VISCOSITY: 55-60 KU @77ºF
pH: 8.5-9
COLORS: N/A

DRY TIME: • To touch: 30 minutes • To recoat: 2 hours • Light use: 24 hours • Moderate use: 3-5 days • Maximum use: 1 week Note: Maximum cure and dry time will be prolonged when slightly humid and damp, cool conditions prevail.

CLEAN UP: Warm soapy water Dispose of contaminated absorbent, container and unused contents in accordance with local, state and federal regulations.

COVERAGE (SQ. FT./US GAL.): • 400-500 sq. ft./gal. Note: Actual coverage will vary depending upon application method, surface texture and porosity.

RECOMMENDED FILM THICKNESS/COAT: N/A
FLASH POINT: N/A
SHELF LIFE: Unopened >5 years
FREEZE/THAW: Keep from freezing

Do not thin.

New Wood: Sand smooth using fine sandpaper, vacuum sanding dust. Wipe using a tack-cloth to remove any remnants of dust prior to application. Do not use steel wool. If open-grained woods are to be filled, use a filler that does not contain stearates or waxes such as ZAR Wood Patch or ZAR Trowelable Wood Patch.

Old Clear Finishes in Good Condition : Remove grease, dirt, and wax. Sand lightly in the direction of the grain to remove any gloss. Do not use steel wool. Vacuum all sanding dust. Wipe using a tack-cloth to remove any remnants of dust prior to application. If the old finish contains wax or stearates, regardless of condition, remove completely. Test Aqua ZAR in an inconspicuous area for compatibility.

Old Clear Finishes in Poor Condition, Lacquer or Shellac: Remove completely. Do not use steel wool. Sand and vacuum all sanding dust. Wipe using a tack-cloth to remove any remnants of dust prior to application.

If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE,ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH- approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.

Apply when air and surface temperatures are between 60°F and 90°F and the relative humidity is less than 60%. Stirring not required for Gloss. For Satin, Semi-Gloss and Antique Flat stir thoroughly before and during application. Do not shake! Use a clean synthetic fiber or foam brush, lamb’s wool applicator or pad. Do not apply with a roller! To ensure satisfactory results always test Aqua ZAR in an inconspicuous area before completing entire job. Apply thin coats at a rate of 400-500 sq.ft per gallon in the direction of the grain. Too thick of a coat may appear milky when dry. Do not over brush or trap air bubbles in the finish.

Floor Application : Prepare surface as described under “Prepare Wood Surface Before Finishing”. If floor is to be stained follow manufacturer’s directions. Areas with poor ventilation such as closed rooms, corners and hallways may take longer to dry. Apply AQUA ZAR using a brush, synthetic applicator or pad. A minimum of three coats is required. Allow floors to dry 24 hours before subjecting to light foot traffic; three to five days before moderate (normal) traffic or moving furniture. One week is required before maximum hardness is achieved. Do not cover floors with rugs before one week has elapsed. If floor should become marred or scratched, sand lightly using fine sandpaper, vacuum all sanding dust, wipe with a cloth dampened with water and apply another coat.

CONTAINS SMALL AMOUNTS OF DIETHYLENE GLYCOL BUTYL ETHER, and N-METHYL PYRROLIDONE. Vapor may be harmful. May affect the brain or nervous system causing dizziness, headache or nausea. Causes nose, throat and eye irritation. May be harmful if absorbed through skin. Harmful if swallowed.

NOTICE: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. Use only with adequate ventilation. Do not breathe vapors or spray mist. Ensure fresh air entry during application and drying. If you experience eye watering, headache or dizziness, or if air monitoring demonstrates vapor/mist levels are above applicable limits, wear an appropriate, properly fitted respirator  (NIOSH approved) during and after application. Follow respirator manufacturer’s directions for respirator use. Do not get in eyes, on skin or clothing. Wash thoroughly after handling.

KEEP OUT OF REACH OF CHILDREN.

DO NOT TAKE INTERNALLY CLOSE CONTAINER AFTER EACH USE.

KEEP FROM FREEZING.





Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

ZAR