(Your shopping cart is empty)
Search 



 
CHOOSE YOUR
CURRENCY
Note: Not live rates
For reference purposes only
All sales in US Dollars


Join our mailing list!










  Home > Minwax >

  Minwax Wood Filler
  Minwax Wood Filler
Minwax Wood Filler


Bookmark and Share
 
Minwax® High Performance Wood Filler is used to fill gouges and holes in split, damaged or rotted exterior or interior woods. It is weather, water, and rot resistant. Minwax® High Performance Wood Filler is also effective as a wood adhesive where you can anchor screws and secure loose joints in furniture. It strongly bonds to wood as well as almost any rigid surface including ceramics, concrete, metal, and fiberglass.

Item# Item Name List Price Our Price Qty Add
42851 Minwax Wood Filler 1 Oz. $5.50 $4.72
42851-BOX Minwax Wood Filler 1 Oz. - (Box of 6)
Save by the box: $4.45 ea
$33.01 $26.72
42852 Minwax Wood Filler 6 Oz. $9.02 $7.70
42852-BOX Minwax Wood Filler 6 Oz. - (Box of 6)
Save by the box: $7.26 ea
$54.12 $43.56
42853 Minwax Wood Filler 16 Oz. $12.30 $10.46
42853-BOX Minwax Wood Filler 16 Oz. - (Box of 6)
Save by the box: $9.84 ea
$73.80 $59.04
Check the items you wish to purchase, then click


Technical Specs:
  • Directions

  • 1. Area must be clean, dry and free from paint varnish, dirt, and grease. If working with rotted or soft wood, remove loose material and apply Minwax® High Performance Wood Hardener to strengthen wood fibers and to form a solid base for filling.
  • 2. Scoop golf ball size amount of filler into plastic lid and squeeze in a thin 3/4 inch long line of hardener from the tube. Mix thoroughly. (Mix only as much as can be used in 15 minutes.)
  • 3. Apply the mixed paste immediately to the area to be repaired. Spread on a thin layer followed by sufficient product to fill the gap. Slightly over-fill to allow for sanding down. Work quickly as the mixture remains workable for about 10 minutes at room temperature. (To fill deep holes, spread on 1/8 inch thin layers one at a time until the hole is filled.)
  • 4. After approximately 20 minutes, the repair should be hard enough to be carved and shaped using a sharp modeling knife.
  • 5. Wait at least 30 minutes to sand, plane or file.
  • 6. The Minwax® High Performance Wood Filler can then be painted or stained. To stain Minwax® High Performance Wood Filler, see tips for staining Minwax® High Performance Wood Filler inside cap sticker.

  • Cleanup: acetone following manufacturer’s safety instructions

  • Note: This product absorbs stain differently than wood. Therefore, it is unlikely that exact color match to the original wood will be achieved.



Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Minwax