(Your shopping cart is empty)
Search 
CHOOSE YOUR
CURRENCY
(not live rates)

Join our mailing list!














  Home > Minwax >

  Minwax Water Based Wipe-On Poly
  Minwax Water Based Wipe-On Poly
Minwax Water Based Wipe-On Poly
 
A high-quality, durable clear finish that combines polyurethane protection with a classic hand-rubbed beauty. It's easy to apply. Just wipe it on with a cloth - no need to worry about drips or brush marks. Water Based Wipe-On Poly is a great choice for any project, especially furniture, railings and trim.

Item# Item Name List Price Our Price Qty Add
40916-1 Minwax Water Based Wipe-On Poly Pint Gloss $15.56 $12.80
40917-1 Minwax Water Based Wipe-On Poly Pint Satin $15.56 $12.80
60916-1 Minwax Water Based Wipe-On Poly Quart Gloss $26.05 $21.69
60917-1 Minwax Water Based Wipe-On Poly Quart Satin $26.05 $21.69
Check the items you wish to purchase, then click


Technical Specs:
  • 1. Surface must be dry and free of old finishes in poor condition, paint, wax, grease, polish, dirt or other foreign matter.
  • 2. Sand to obtain a smooth uniform surface. Do not use steel wool. Remove all dust with a damp cloth.
  • 3. If desired, apply stain, such as Minwax® Wood Finish™, following the label directions for application instructions and dry times.
  • 4. Shake Water Based Wipe-On Poly container thoroughly before use.
  • 5. Put liberal amount Water Based Wipe-On Poly on a clean, soft, lint-free cloth and rub into the wood.
  • 6. Allow to dry at least 2-3 hours. Sand entire surface lightly with fine sandpaper (220 grit). Remove all sanding dust.
  • 7. Apply a second coat in the same manner as the first. A third coat is recommended. Repeat Step 6 before application.
  • 8. Allow final coat to dry 24 hours before normal use.

  • Floors: Water Based Wipe-On Poly may be used to touch up small scratches on floors. Apply carefully as gloss level may not be identical to existing floor finish.

  • Note: Water Based Wipe-On Poly is not recommended for general use on floors. To protect floors, use Minwax® Water Based Polyurethane for Floors or Minwax® Water Based Polyurethane.

  • Cleanup: For easy cleanup, use warm water.

  • Coverage: Approximately 125 sq. ft. per quart.




 Share your knowledge of this product with other customers... Be the first to write a review.



Browse for more products in the same category as this item:

Minwax


DAP Wallboard Joint Compound
Jomaps Advanced Mildewcide
Marshalltown Bullnose Outside Corner Trowel