(Your shopping cart is empty)
Search 



 
CHOOSE YOUR
CURRENCY
Note: Not live rates
For reference purposes only
All sales in US Dollars


Join our mailing list!










  Home > Minwax >

  Minwax PolyShades Satin 1/2 Pint
  Minwax PolyShades Satin 1/2 Pint
Minwax PolyShades Satin 1/2 Pint


Bookmark and Share
 
Minwax PolyShades® combines stain for beautiful color with polyurethane for tough protection in one product. It is an ideal choice for those who want to save the time involved in staining with one product and protecting with another.  Before using PolyShades® on soft or porous woods, Pre-Stain Wood Conditioner should be applied to ensure even stain penetration.

Item# Item Name List Price Our Price Qty Add
21340-1 Minwax PolyShades Satin 1/2 Pint Antique Walnut 340 $9.86 $8.26
21340-1BOX Minwax PolyShades Satin 1/2 Pint Antique Walnut 340 - (Box of 6)
Save by the box: $7.85 ea
$59.16 $47.10
21380-1 Minwax PolyShades Satin 1/2 Pint Bombay Mahogany 380 $9.86 $8.26
21380-1BOX Minwax PolyShades Satin 1/2 Pint Bombay Mahogany 380 - (Box of 6)
Save by the box: $7.85 ea
$59.16 $47.10
21370-1 Minwax PolyShades Satin 1/2 Pint Classic Oak 370 $9.86 $8.26
21370-1BOX Minwax PolyShades Satin 1/2 Pint Classic Oak 370 - (Box of 6)
Save by the box: $7.85 ea
$59.16 $47.10
21310-1 Minwax PolyShades Satin 1/2 Pint Honey Pine 310 $9.86 $8.26
21310-1BOX Minwax PolyShades Satin 1/2 Pint Honey Pine 310 - (Box of 6)
Save by the box: $7.85 ea
$59.16 $47.10
21330-1 Minwax PolyShades Satin 1/2 Pint Olde Maple 330 $9.86 $8.26
21330-1BOX Minwax PolyShades Satin 1/2 Pint Olde Maple 330 - (Box of 6)
Save by the box: $7.85 ea
$59.16 $47.10
21320-1 Minwax PolyShades Satin 1/2 Pint Pecan 320 $9.86 $8.26
21320-1BOX Minwax PolyShades Satin 1/2 Pint Pecan 320 - (Box of 6)
Save by the box: $7.85 ea
$59.16 $47.10
21350-1 Minwax PolyShades Satin 1/2 Pint Royal Walnut 350 $9.86 $8.26
21350-1BOX Minwax PolyShades Satin 1/2 Pint Royal Walnut 350 - (Box of 6)
Save by the box: $7.85 ea
$59.16 $47.10
21360-1 Minwax PolyShades Satin 1/2 Pint Tudor 360 $9.86 $8.26
21360-1BOX Minwax PolyShades Satin 1/2 Pint Tudor 360 - (Box of 6)
Save by the box: $7.85 ea
$59.16 $47.10
Check the items you wish to purchase, then click


Features:
  • Minwax Polyshades Color Chart
    The colors that appear on the screen and in print may not match actual applied color.




Extended Information:
SURFACE PREPARATION: For Unstained or Raw Wood Surface must be dry, clean, and free of dirt, grease and glue before starting. Sand the wood in the direction of grain using fine-grain sandpaper (#220) until smooth. Remove all sanding dust. To help ensure uniform acceptance of stain color and beautiful results, pretreat new or raw wood with Minwax® Pre-Stain Wood Conditioner following label directions. For Previously Stained Wood That Is Not Being Stripped Surface must be dry, clean, and free of dirt, grease and glue before starting. Lightly sand the wood to ensure adhesion. Remove all sanding dust. PRODUCT PREPARATION AND COLOR TESTING Stir PolyShades® thoroughly before use and occasionally during use. Do not thin. Always test stain on a scrap piece or hidden area of wood to verify desired color. APPLICATION: Two coats are recommended for maximum beauty and protection. Using a natural bristle brush, dip an inch or so into the can, gently tapping it against the inside to remove any excess. Apply a thin, even coat following the direction of the grain. Make sure to maintain a “wet” edge. To minimize brush marks and bubbles after staining, tip off the surface by holding the brush at a 45 degree angle and lightly run the bristles over the entire length of the wood. Let the first coat dry for 6 hours or more. Dry time may be extended due to high humidity, low temperatures, and inadequate ventilation or if the coat applied is too thick. Rub surface lightly with fine steel wool (grade 000 or finer). Remove all dust. Brush on a second thin coat following the directions above. You may apply more than two coats if you want to deepen the color. Special Note: For additional protection, without adding color, add a coat of Minwax® Fast-Drying Polyurethane or Wipe-On Poly following label instructions. COVERAGE: Approximately 120-150 square feet per quart. CLEANUP: Use mineral spirits following manufacturer's safety recommendations.


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Minwax