IMPORTANT: This aerosol can discharges material very rapidly. Follow instructions carefully for proper results. DO NOT spray sideways or upside down. Eye protection recommended.
WARM CAN TO ROOM TEMPERATURE BEFORE USE. Prep surface properly before applying. Use putty knife to scrape away stained or damaged texture. Apply white primer/sealer before applying.
Do not apply too heavily or texture will sag. For a heavier “chip” texture, apply multiple thin coats, allowing texture to dry slightly between applications. If painting over texture is desired, allow to dry for 24 hours before painting. Clean up with warm water. Covers approximately 6 sq. ft.